Details

---

 

Product outline

FC400-DAC-FA is a compact type indicator equipped with D/Aconverter & USB as standard features.
Suitable for force measurement in switches product testing and tablet press machine Multi-channel system built up in a network can be done easily.
It has displayable graph in the pc software, and setup can be done easily.

 

High sampling rate & resolution

High-Speed A/D conversion and powerful digital processing capability of 2400 times/sec.. High display resolution of 1/100000 (max).

Measurement can be performed quickly and precisely due to high speed A/D conversion.
 

Application software for USB interface

With communication through USB interface, logging, graph, display, setting parameters, and calibration can be done.

 

Compact size

it can be fit into a limited space!
Lightvweing & compact body for 35mm DIN rail mount.

 

Various interface

 

Equivalent input calibration

Theoretical calibration can be performed easily by registering the capacity and rated output of load cells.

Digital peak & Bottom hold. Upper and lower limit comparison

OK / NOK judgement in fast process can be made.

Input conversion value display

The output signal level of load cell can be displayed in mV/V for monitor purpose.

6 digit display

24 bit A/D convertor enables 6 digit display.

Specifications

Analog section｜Display section｜Hold functions｜External signal｜Interface｜General performance｜Attachments

 

Analog section
Excitation voltage	DC5V±5% Output current: 90mA DC2.5V±5% Output current: 45mA(depending on settings) Ratiometric method (Up to 6 350Ω load cells can be connected in parallel)
Signal input range	-3.9 to 3.9mV/V
Zero adjustment range	Automatic adjustment by digital processing -3.0 to 3.0mV/V
Span adjustment range	Automatic adjustment by digital processing 0.01 to 3.8mV/V
Min. input sensitivity	0.15μV/count
Accuracy	Non-linearity: within 0.01%FS Zero drift: 0.0002%FS/℃ Typ Gain drift: 1ppm/℃ Typ
Filter	Digital low-pass filter: 0.1 to 600 Hz Moving average filter: OFF, 2 to 999 times
A/D converter	Speed: 2400 times/sec. Resolution: 24bit binary

Display section
Display unit	Character height 8mm, Numerical display by 7-segment green LED
Display value	Up to 6 digits
Display frequency	Selectable from 1, 3, 6, 13, 25 times/sec.

Hold functions
Hold	Sample,Peak,bottom,peak & bottom,average

External signal
Output signal (5)	Transistor’s open collector output Vceo=30V, Ic=50mA
Input signal (3)	Selectable/configurable Input is ON when shorted to COM terminal by contact (relay switch, etc.) or non contact (transistor, open collector, etc.). * DC24V external power supply is required.

Interface
USB	USB interface
DAC	D/A converter(Voltage and current output)
485	RS-485 interface (Selectable from Modbus-RTU or UNI-Format)

General performance
Power supply voltage	DC24V (±15%)
Power consumption	3W typ
Operating conditions	Temperature: Operating temperature range: -10℃ to +50℃, Storage temperature range: -20℃ to +85℃ Humidity: 85%RH or less (non-condensing)
Dimensions	34(W)×88(H)×91(D)mm (Projections excluded)
Weight	Approx. 210g
CE marking certification	EMC Directives EN61326-1

Attachments
Jumper cable	2
Mini driver	1
Various I/O connector	3
Quick manual	2

 

Download

Product catalogue(PDF)		FC400-FA catalogue(1 MB)