FC400-CCL

 

FC400-CCL is a weighing indicator equipped as standard with CC-Link interface. It is ideal for a variety of weighing applications like hopper scales, bagging machines, and level meters.
Network with multiple units can be configured easily.

DIN-rail mountable
Dimensions: 34(W)×88(H)×91(D)mm (Projections excluded)
Weight: Approx. 210g

 

Equipped with CC-link, RS-485, and USB interface!

 

High-Speed A/D conversion and powerful digital processing capability of 1200 times/sec..
High display resolution of 1/100000 (max).

Measurement can be performed quickly and precisely due to high speed A/D conversion.

 

■ High performance filter
As it is resistant to vibration, measurement can be performed quickly and precisely.
 

■ Equivalent input calibration
Theoretical calibration can be performed easily by registering the capacity and rated output of load cells.
 

■ Multipoint calibration (linearization)
Three additional points can be defined in the middle between zero and span for better linearity.
 

■ Basic weighing process control function
Sequential control can be performed without connecting external PLC etc.
 

 

 

Analog｜Display｜External signal｜Interface｜General specification｜Attachment

Analog
Excitation voltage	DC5V±5% Output current: 90mA Ratiometric method (Up to 6 350Ω load cells can be connected in parallel）
Signal input range	－2.5 to 5.1mV/V
Zero adjustment range	Automatic adjustment by digital processing -0.5 to 2.0mV/V
Span adjustment range	Automatic adjustment by digital processing 0.02 to 3.0mV/V
Gain correction	Up to three point multi-point calibration is possible using linearization function
Min. input sensitivity	0.15μV/count
Accuracy	Non-linearity: within 0.01%FS Zero drift: 0.0002%FS/℃ Typ Gain drift: 1ppm/℃ Typ
Filter	Digital low-pass filter: 0.1 to 300 Hz Moving average filter: OFF, 2 to 512 times
A/D converter	Speed: 1200 times/sec. Resolution: 24bit binary

Display
Display unit	Character height 8mm, Numerical display by 7-segment green LED
Display value	Up to 6 digits
Display frequency	Selectable from 3, 6, 13, 25 times/sec.
Status display	RUN, SD, RD, ERR

External signal
Output signal (5 points)	Selectable/configurable Transistor’s open collector output Vceo=30V, Ic=50mA
Input signal (3 points)	Selectable/configurable Input is ON when shorted to COM terminal by contact (relay switch, etc.) or non contact (transistor, open collector, etc.). * DC24V external power supply is required.

Interface
USB	USB interface
485	RS-485 interface (Selectable from Modbus-RTU or UNI-Format)
CCL	CC-Link interface

General specification
Power supply voltage	DC24V (±15%)
Power consumption	3W typ
Operating conditions	Temperature: Operating temperature range: -10℃ to ＋50℃, torage temperature range: －20℃ to ＋85℃ Humidity: 85%RH or less (non-condensing)
Dimensions	34(W)×88(H)×91(D) mm (Projections excluded)
Weight	Approx. 210g

Attachment
Jumper cable	2
Mini driver	1
CC-Link connector	1
Various I/O connector	2
Quick manual	2